China Good quality Suspension TUV Catenary Shot Blasting Machine Agricultural Machinery Parts Cleaning with Good quality

Product Description

Loop Chain Type Shot Blasting Machine 
Hanger Shot Blaster 
Over Head Hook 
For Casting Forging Parts

Loop chain shot blasting machine is designed and manufactured as continuous machine for the treatment of sensitive parts which cannot be tumbled in bulk loads, and for particularly complex, heavy, or large parts. The shot blasting machines with continuous monorail hooks allow processing a large volume of components greatly reducing the loading / unloading time as opposed to discontinuous blasting equipment with hooks. The parts to be blasted are supported by hooks mounted to an overhead rail system and subsequently transported into the blasting chamber. The flow can be continuous or discontinuous as required by the customer. With continuous flow shot blasting units, components later may be painted using the same transport rail system as used in the shot blasting process. In this way, unnecessary operator handling of the parts is eliminated further increasing productivity.

Technical parameters

Parameters HXL-2-15/1112-430 HXL-2-15/1315-430 HXL-3-22/1516-430 HXL-3-22/1521-430 HXL-4-22/1521-430
Turning diameter
1100 1300 1500 1500 1500
Hook height(mm) 1250 1500 1600 2100 2100
No. Of shot blaster 2 2 3 3 4
Power of single shot blaster(Kw) 15 (11) 15 (11) 22 (15) 22 (15) 22 (15)

Hanger Chain Shot Blast Machine provides two work positions and adopts fixed rotating point blasting method for removing the unwanted sand, oxidized layer and other deposits from the partsurface quickly, thus making the surface bright and clean. The shot blasting equipment is mainly used for the vehicle parts, such as the bolster, side frame, coupler and coupler yoke, as well as for cleaning the castings and workpieces with the similar size.

Blasting Chamber:
Our hanger chain shot blast machine is manufactured to satisfy our customers with long life andhigh operating efficiency. The blast chamber is made using steel plate and structural steel framing through welding process, which offers high rigidity and strength, resulting in extended service life. To prevent shots from flying out of the chamber, much attention is given to the sealing structure of the chamber and door when we design the shot blast machine

Blasting Wheels:
In addition, the location of blast wheels is based on the computer three dimensional dynamic simulation result, which helps ensure all sides of workpieces can be thoroughly and quickly cleaned, thereby increasing efficiency.

our company established in the year of 1994, lies in HangZhou--the production & export base for foundry machinery.At the moment, the company has 180 employees, including 15 professional technicians.The company mainly produces 7 series of products in foundry industry as cleaning equipment and sand-treatment molding equipment in sets. The main products include Q69 series pass-throughtype shot-blast cleaning machine, QGseries internal and external walls of steel tube shot-blast cleaning machine, hook & sling chain type shot blast cleaning room, turning & trolley shot blast cleaning room, sand-blasting machine, environmental production dust collector, etc. It's also possible to design and manufacture all kinds of non-standard special foundry machines according to customer requirements.Its products have been widely used in the fields such as petroleum, chemical, ironware, plastics,marine repair, steel structure, container, bridge, machinery, clothes and etc. Our extensive experience means you get a better facility, at a competitive price, with the best lead time.
Our Services

1,One year warranty for machine
2,We offer online service 24 hours all day Skype, Email and so on.
3,You can contact us any time,if urgently,pls call us.
4,English manual and Video CD for manchine using and maintance.

Q 1: Do you have after-sale service?
A : yes, we have perfect after-sale service
Q 2: How long can your spare parts be used?
A: Blade, control cage and distributor are high chrome, and can be used for more than 2000 hours.
    Kinds of guard board can be used for more than 3000 hours.
Q 3: Where is your factory?
A: We are near HangZhou Airport, you are welcome to be HangZhou Airport and then we will arrange car to pick you up there. Sincerely welcome here to investigate our factory in person.
Q 4. How about your company ?
A:Our company is the biggest manufacturer of metal CZPT and shot blasting machine in china , we have exported to more than 30 counries and regions , and got good comments from overseas and domestic.

Axle Spindle Types and Features

The axle spindle is an integral part of your vehicle's suspension. There are several different types and features, including mounting methods, bearings, and functions. Read on for some basic information on axle spindles. The next part of the article will cover how to choose the correct axle spindle for your vehicle. This article will also discuss the different types of spindles available, including the differences between the rear and front bearings.


The improved axle spindle nut assembly is capable of providing additional performance benefits, including increased tire life and reduced seal failure. Its keyway features and radially inwardly extending teeth allow nut adjustment to be accomplished with precision. The invention further provides a unique, multi-piece locking mechanism that minimizes leakage and torque transfer. Its principles and features are detailed in the appended claims. For example, the improved axle spindle nut assembly is designed for use in vehicles that are equipped with a steering system.
The axle spindle nut assembly includes a nut 252 with threads 256 on its inner periphery. The axle spindle 50 also features threads 198 on its outer periphery. The nut is threaded onto the outboard end of the axle spindle 50 until it contacts the inboard surface of the axle spacer 26. In the assembled state, a bearing spacer 58 is also present on the axle spindle.
The axle spindle nut assembly can reduce axial end play between the wheel end assembly 52 and the axle spindle 50. It can be tightened to an extreme torque level, but if the thread faces separate, it will undercompress the bearing cone and spacer group. To minimize these disadvantages, the axle spindle nut assembly is a critical component of a wheel-end assembly. There are several types of axle spindle nuts.
The third embodiment of the axle spindle nut assembly 300 comprises an inner washer 202, an outer washer 310, and at least 1 screw 320. The axle spindle nut assembly 300 secures and preloads bearing cones 55, 57. Unlike the first embodiment, the axle spindle nut assembly 300 uses the inner washer 202, which is optional in the third embodiment. The inner washer 202 and outer washer 310 are similar to those of the first embodiment.


An axle spindle is 1 of the most important components of a vehicle's suspension system. The spindle retains the position of bearings and a spacer in an axle by providing clamp force. The inner nut of an axle spindle should be properly torqued to ensure a secure fit. A spindle nut is also responsible for compressing bearings and spacers. If any of these components are missing, the spindle will not work properly.
An axle spindle is used in rear wheel drive cars. It carries the weight of the vehicle on the axle casing and transfers the torque from the differential to the wheels. The axle spindle and hub are secured on the spindle by large nuts. The axle spindle is a vital component of rear wheel drive vehicles. Hence, it is essential to understand the functions of axle spindle. These components are responsible for the smooth operation of a vehicle's suspension system.
Axle spindles can be mounted in 3 ways: in the typical axle assembly, the spindles are bolted onto the ends of the tubular axle, and the axle is suspended by springs. Short stub-axle mounting uses a torsion beam that flexes to provide a smooth ride. A second washer is used to prevent excessive rotation of the axle spindle.
Apart from being a crucial component of the suspension system, the spindles of the wheels are responsible for guiding the vehicle in a straight line. They are connected to the steering axis and are used in different types of suspension systems. European cars use a MacPherson Strut suspension system in which the spindle is connected to the arms in the front and rear of the suspension frame. The MacPherson strut allows the shock absorber housing to turn the wheel.

Methods of mounting

Various methods of mounting axle spindle are available. In general, these methods involve forming a tubular blank of uniform cross section and thickness, and receiving the bearing assembly against it. The spindle is then secured using a collar, which also serves as a bearing stop. In some cases, additional features are used to provide greater security. Some of these features may not be suitable for all applications. But they are generally suitable.
Axle spindle forming is usually done by progressive steps using hollow punches. The metallic body of the punch has an inner work surface, which receives the axle blank. A mandrel is fixed within the work opening of the punch. The punch body's work surface forges the spindle about the mandrel. The punch has 2 ends, a closed and an open one.
A wheeled vehicle axle assembly (10) includes a cylindrical housing member (12 a) and a plurality of spindle mounting flanges (30) secured on the housing member. The spindles (16) are firmly attached to the housing member by means of coupling members. The coupling members are configured to distribute the bending loads imposed on the spindle by the axle. It is important to note that the coupling members can be either threaded or screwed.
Traditionally, axle spindles were made from tubular blanks of irregular thickness. This method allowed for a gradual reduction in diameter and eliminated the need for extra metal within the spindle. Similarly, axles made by cold forming eliminate the need for additional metal in the spindle. In this way, the overall cost of manufacture is also reduced. The material used for manufacturing axles also determines the size and shape of the final product.


A nut 16 is used to retain the wheel bearings on axle spindle 12. The nut comprises several parts. The first portion includes a plurality of threads and a deformable second portion. The nut may be disposed on the inboard or outboard end of the axle spindle. This type of nut is typically secured to the axle spindle by a retaining nut.
The bearings are installed in the spindle to allow the wheel hub to rotate. While bearings are greased, they can dry out over time. Consequently, you may hear a loud clicking sound when turning your vehicle. Alternatively, you may notice grease on the edges of your tires. Bearing failure can cause severe damage to your axle spindle. If you notice any of these symptoms, you may need to replace the bearings on your axle spindle. Fortunately, you can purchase the necessary bearing parts at O'Reilly Auto Parts.
There are 3 ways to mount an axle spindle. A typical axle assembly has the spindles bolted to the ends of the tubular axle. A torsion beam is also used to mount the spindles on the axle. This torsion beam acts like a spring to help make the ride smooth and bump-free. Lastly, the axle spindle is sometimes mounted as a bolt-on component.


If your axle spindle has been damaged, you may need to have it replaced. This part of the axle is relatively easy to replace, but you need to know how to do it correctly. To replace your axle spindle, you must first remove the damaged one. To do this, a technician will cut the weld. They will then thread the new 1 into the axle tube and torque it to specification. After that, they will weld the new axle spindle into place.
When you are thinking about the cost of an axle spindle replacement, you must first determine if it is worth it for your vehicle. It is generally a good idea to replace the spindle only if it is causing damage to your vehicle. You can also replace your axle housing if it is deteriorating. If you do not replace the spindle, you can risk damaging the axle housing. To save money, you can consider using a repair kit.
You can also purchase an axle nut socket set. Most wrenches have an adjusting socket for this purpose. The socket set should be suitable for most vehicle types. Axle spindle replacement costs around $500 to $600 before tax. However, you should be aware that these costs vary widely based on the type of vehicle you have. The parts can cost between $430 and $480, and the labor can cost anywhere from $50 to 70.

China Good quality Suspension TUV Catenary Shot Blasting Machine Agricultural Machinery Parts Cleaning     with Good qualityChina Good quality Suspension TUV Catenary Shot Blasting Machine Agricultural Machinery Parts Cleaning     with Good quality