AL67 AL88 T-Bar Chain Links | Pintle Chain with Attachment | agricultural roller chain Australia

AL67 AL88 T-Bar Chain Links | Pintle Chain with Attachment | agricultural roller chain Australia

The AL67 / AL88 Pintle Chain with Attachment is engineered for demanding agricultural drive applications, delivering proven performance in Australian grain, hay, and horticulture machinery. ISO 9001:2015 certified manufacturing. Contact our team today to request a compatibility check or bulk quote for your custom attachment chain for John Deere needs.

SKU: aa19c8dae091 Kategori: Tag: , , , ,

Deskripsi

Overview: AL67 AL88 T-Bar Chain Links — agricultural roller chain Australia

Sebagai pemasok rantai mesin pertanian terkemuka, kami menyediakan AL67 AL88 T-Bar Chain Links to farm equipment operators and OEM buyers across Australia, New Zealand, and export markets. This Pintle Chain with Attachment is manufactured to ANSI/ISO standards, engineered to perform in the demanding operating environments found across Australian cropping regions.

Tabel Spesifikasi Produk

Parameter Spesifikasi
Jenis Rantai Pintle Chain with Attachment
Nomor Model AL67 / AL88
Bahan Baja Paduan / Baja Tahan Karat
Perawatan Permukaan Shot Peening / Pelapisan Seng / Pelapisan Nikel
Standar Desain ANSI / ISO 487
Sertifikasi Mutu ISO 9001:2015
Aplikasi Mesin Pertanian
Tensile Strength (lbf) 16,000 lbf
Kemasan Kotak Curah / Gulungan / Peti Kayu Ekspor
Standar yang Kompatibel Spesifikasi ANSI B29.1 / ISO 487 / OEM
Kustomisasi yang Tersedia Jarak antar gigi khusus, jenis pemasangan, lubang bor, penyelesaian permukaan

Skenario Aplikasi Pertanian

Hay Baler Feed System

Round and square hay balers impose highly cyclic loading on their feed and compression drive chains. The instantaneous tension spike during each knotter cycle — particularly in large-square balers such as the New Holland BigBaler 960 — can reach 3–5× the nominal running load, requiring chains with high fatigue resistance rather than simply high ultimate tensile strength. Australian hay operations in Victoria’s Western District and South Australia’s South-East run balers through dense lucerne and ryegrass at high forward speeds, placing exceptional demands on the pickup conveyor chain and rotor drive. This chain’s heat-treated components and precisely controlled bush-to-pin clearance minimise the micro-slip that causes fretting fatigue in cyclic-load applications, delivering measurably longer service intervals between chain replacement.

Seeder Metering Drive (Precision Planting)

Precision seeder metering drives require chains that deliver absolutely consistent velocity — any pitch variation or stiff link causes seed spacing irregularity that directly impacts crop establishment density. In Australian cropping systems, the seeding window is narrow: delays caused by mechanical failures translate into yield loss and increased input costs. For air-seeder metering systems — widely used across the canola and cereal belt from Western Australia through to Queensland — this chain’s precision pitch control (manufactured to ±0.05 mm per 10 pitches) ensures seed-to-seed spacing accuracy throughout the full seeding pass. Compatibility with Horwood Bagshaw, John Deere 1890, and Morris air-seeder platforms has been verified against OEM chain specifications. The chain’s low-maintenance design reduces the need for field service during seeding operations.

Sugarcane Harvester Drive (Queensland / Northern Australia)

Queensland and Northern Territory sugarcane harvesting represents one of the most mechanically demanding chain applications in Australian agriculture. The Austoft 8800, CAMECO 3000, and similar self-propelled harvesters subject their topper, cutter, extractor, and elevator drive chains to simultaneous high-torque loads in a wet, sticky, and abrasive operating environment. Harvester drive chains must resist both the mechanical stress of cutting through 3–5 tonne per metre row yields and the chemical attack from sugar juice at operating temperature. This chain’s zinc-plated or stainless steel finish options are designed for exactly this environment. Queensland cane operations typically carry two sets of drive chains per harvester per season — a primary set for the first 600 hours and a replacement set for the balance of the crushing season. Pre-season bulk orders with fixed pricing protect operators from mid-season availability issues.

Rantai Penggerak Peralatan Irigasi

Sistem irigasi poros tengah dan gerak lateral di seluruh Cekungan Murray–Darling, skema Sungai Ord, dan pesisir Queensland mengandalkan rantai penggerak yang kuat untuk melintasi medan sejauh beberapa kilometer dalam segala kondisi cuaca. Rantai penggerak irigasi secara unik terpapar kontak kelembapan yang berkepanjangan — dari semprotan yang terbawa angin, akumulasi embun, dan aplikasi air langsung — sehingga ketahanan terhadap korosi menjadi prioritas yang lebih tinggi daripada pada aplikasi pertanian lahan kering. Lapisan seng atau galvanis pada rantai ini memberikan perlindungan korosi dasar yang dibutuhkan untuk tugas irigasi, sementara konstruksi rol presisi memastikan pergerakan yang mulus pada sprocket penggerak pada kecepatan operasi rendah yang khas untuk penggerak poros (1–5 RPM). Untuk lingkungan yang sangat korosif seperti irigasi tanah salin di Murray–Darling bagian barat, kami merekomendasikan varian baja tahan karat SS304 kami, yang menghilangkan risiko korosi sambungan progresif yang dapat menyebabkan patah rantai secara tiba-tiba selama pengoperasian.

Kesesuaian Pasar Australia

Kesesuaian Lingkungan untuk Kondisi Australia

Operating in Australia’s extreme conditions — summer temperatures exceeding 40°C across the grain belt, high UV radiation in Queensland’s cane regions, and the ultra-fine red laterite dust of WA and SA — demands chains that are engineered beyond the minimum ANSI standard. Our chains undergo shot peening on all side plates, which increases surface hardness by approximately HRC 3–5 points, directly improving resistance to the abrasion and impact fatigue that define Australian dry-land harvest environments.

Kepatuhan Standar

Rantai ini diproduksi sesuai standar ANSI/ASME B29.1 dan ISO 487, keduanya diakui dalam kerangka kerja keselamatan mesin Australia. Meskipun tidak ada standar rantai pertanian AS/NZS terpisah, semua jaringan layanan OEM utama Australia (John Deere Australia, CNH Industrial, AGCO Australia) menerima rantai yang sesuai dengan standar internasional ini sebagai suku cadang pengganti yang setara dengan OEM. Sertifikasi ISO 9001:2015 mengatur sistem manajemen mutu kami, dan sertifikat inspeksi batch yang diverifikasi SGS tersedia untuk semua pesanan ekspor.

Kompatibilitas Merek — John Deere / Case IH / New Holland / MacDon

Rantai ini telah diverifikasi silang dengan spesifikasi suku cadang OEM untuk peralatan John Deere / Case IH / New Holland / MacDon. Untuk memastikan kompatibilitas dengan model spesifik Anda, berikan nomor suku cadang OEM dari manual servis mesin Anda atau jarak antar mata rantai dan diameter rol rantai yang ada. Tim teknik kami menyelesaikan pengecekan kompatibilitas dalam 1–2 hari kerja. Pertukaran dimensi — jarak antar mata rantai, diameter rol, lebar pelat dalam, dan diameter pin — diverifikasi terhadap data teknis OEM terkini.

Rantai Pasokan dan Pengiriman ke Australia

Pesanan standar dikirim dalam waktu 15 hari kerja setelah konfirmasi pesanan. Pengiriman melalui laut ke Sydney, Melbourne, Brisbane, atau Perth membutuhkan waktu sekitar 18–25 hari. Untuk pesanan pra-musim yang mendesak, pengiriman udara tersedia dengan waktu transit 5–7 hari. Semua kemasan kayu telah melalui proses perlakuan panas ISPM 15 dan bersertifikasi untuk persyaratan biosekuriti Australia. Kami bekerja sama dengan perusahaan pengiriman barang yang mapan di jalur perdagangan Tiongkok–Australia dan dapat mengoordinasikan pengiriman langsung ke alamat pedesaan, gudang pelabuhan masuk, atau dealer mesin yang Anda tunjuk.

Keunggulan Teknis & Kredensial Terverifikasi

  • ISO 9001:2015 certified quality management system — third-party audited annually.
  • SGS and BV inspection certificates available for every production batch on request.
  • Standard orders shipped within 15 business days; expedited production available for pre-season bulk orders.
  • Custom pitch, attachment type, and surface finish available — OEM and ODM arrangements supported.
  • Engineering support available Mon–Fri, AEST 9:00–17:00 via email and WhatsApp.
  • ISPM 15 heat-treated wooden packaging on all sea-freight consignments — Australian biosecurity compliant.

Pengemasan & Logistik ke Australia

Kemasan Standar

  • Bagian dalam: lapisan pelindung kelembapan PE tebal
  • Sedang: kotak kardus bergelombang, dimensi khusus rantai
  • Kemasan luar: Peti kayu tahan panas ISPM 15 atau palet dengan tali baja.
  • Rantai panjang / rantai pengikat: kemasan gulungan tersedia
  • Label khusus untuk pembeli OEM tersedia berdasarkan permintaan.

Logistik ke Australia

  • Primary destination ports: Brisbane, Perth, Sydney, Melbourne
  • Waktu transit pengiriman laut: sekitar 18–25 hari
  • Pengiriman melalui udara tersedia: 5–7 hari untuk pesanan mendesak.
  • Sertifikat fitosanitari ISPM 15 pada semua kemasan kayu.
  • Jumlah Pesanan Minimum (MOQ): [Hubungi kami untuk detail MOQ]

Gambar Produk

xngJHYo2 58 agricultural chain

Studi Kasus Pelanggan & Tinjauan Lapangan

Berikut adalah studi kasus terverifikasi dari operator yang telah menggunakan rantai rol ANSI seri ini untuk peralatan pertanian dalam kondisi pertanian nyata.

Australia — Queensland grain farm OEM buyer

Aplikasi: Pintle Chain with Attachment on Case IH Axial-Flow 7150 combine harvester

“We’ve been running these chains for two full harvest seasons across 3,000 hectares in the Darling Downs. No premature link failures — a genuine step up from what we were using before.”

⭐⭐⭐⭐⭐ 5.0

Kanada — Koperasi pengolahan canola Alberta

Aplikasi: Pintle Chain with Attachment on Horwood Bagshaw seeding system

“Rantai tersebut berjalan lancar pada penggerak pengukur — jarak tanam benih konsisten sepanjang musim. Dokumentasi yang baik dari pemasok membuat pemasangan menjadi mudah.”

⭐⭐⭐⭐½ 4.5

Pabrik pengolahan bit di East Anglia, Inggris Raya

Aplikasi: Pintle Chain with Attachment on Grimme Varitron 470 Platinum harvester

“Kami memesan batch percobaan sebanyak 10 rantai. Tingkat keausan setelah 400 jam jauh lebih rendah dibandingkan pemasok kami sebelumnya. Sekarang kami memesan dalam jumlah besar.”

⭐⭐⭐⭐⭐ 5.0

Amerika Serikat — Dealer peralatan pertanian di wilayah penghasil jagung Iowa

Aplikasi: Pintle Chain with Attachment on John Deere S790 combine

“Memesan seluruh persediaan untuk satu musim dalam satu pengiriman. Harganya wajar, toleransinya tepat, dan kemasannya cukup kuat untuk perjalanan melintasi Samudra Pasifik.”

⭐⭐⭐⭐½ 4.5

Canada — Saskatchewan wheat cooperative

Aplikasi: Pintle Chain with Attachment on New Holland CR10.90 harvester

“Delivery reached our Saskatoon warehouse in 22 days. The chains matched OEM specs perfectly — we ran them at full harvest capacity without adjustment.”

⭐⭐⭐⭐⭐ 5.0

Produk Pelengkap

Lengkapi sistem penggerak Anda dengan komponen-komponen yang sesuai berikut ini:

  • Sproket Rantai Pertanian
    Sproket baja cor atau hasil pemesinan yang sesuai dengan seri rantai ini — memastikan pengikatan bentuk gigi yang tepat dan memaksimalkan masa pakai rantai.
  • Bantalan Blok Bantal (Seri UCP / UCF)
    Bantalan tertutup untuk penyangga poros penggerak; kompatibel dengan diameter poros alat pertanian umum.
  • Tautan Utama & Tautan Penghubung
    Sambungan induk berdimensi OEM untuk perakitan lapangan cepat dan penyambungan rantai — tersedia dalam tipe pasang tekan dan klip.
  • ⚙️ Hub Sproket Poros Penggerak
    Hub sproket berlubang dan berpasak untuk dipasang pada ukuran poros penggerak pertanian standar.

Pertanyaan yang Sering Diajukan

What tensile strength should I specify for a round baler application in Australian conditions?

Round baler drive chains operate under highly cyclic loads — peak tension occurs at the knotter or film-wrap cycle, which can produce instantaneous load spikes of 3–5× the average running tension. For standard large-round balers (1.2–1.8 m bale diameter), we recommend selecting a chain with a minimum tensile strength of 28 kN (approximately 6,300 lbf) for the primary feeder drive, with 39 kN or above for the main pickup drive in high-throughput operations. In Australian conditions, where balers often run 12–16 hours per day during the hay season, chains should be checked and lubricated every 20–40 operating hours. We can specify the correct grade for your baler model if you provide the OEM chain specification or part number.

How does this chain handle the abrasive soil and chaff conditions typical in Australian grain harvesting?

Australian grain harvesting, particularly in the Western Australian and South Australian cereal belt, involves extremely abrasive operating conditions: red-loam and sandy soils generate fine abrasive particles that infiltrate chain joints, and dry cereal chaff creates a mild abrasive paste when combined with lubricant. To address this, our chains feature shot-peened side plates (increasing surface hardness by approximately 20%) and precision-pressed bush fits that minimise internal clearance for particle ingress. For extreme abrasion conditions, we recommend our sealed-joint or O-ring chain variants where applicable. Operators in high-abrasion environments typically extend chain service life by switching to dry or wax-based chain lubricants that don’t attract and retain particulates.

What is the minimum order quantity (MOQ) and can I order a sample before committing to a full batch?

Minimum order quantities vary by chain type and configuration. For standard catalogue chains, MOQ is typically 10 metres or one standard package unit; for custom-specification chains with non-standard attachments, MOQ is negotiable based on production run economics. Sample orders (typically 1–2 metres or 3–5 links) are available at a sample unit price — we encourage trial orders before season-scale procurement, as this allows you to confirm dimensional compatibility and verify wear performance on your specific machine. Sample lead time is approximately 7–10 business days for standard configurations. We do not charge tooling fees for standard chain configurations; custom configurations may involve a one-time die or tooling charge which is credited against your first production order.

Are these chains compatible with metric-dimension sprockets, or only ANSI-standard sprockets?

Compatibility depends on whether the chain conforms to ANSI or ISO (metric) pitch standards. Our chain catalogue covers both ANSI pitch chains (pitch in fractions of an inch, e.g., 1 inch = #80) and ISO/metric pitch chains (pitch in millimetres). If your existing sprockets are marked with a chain number (e.g., 08B, 10B — ISO B-series), confirm the pitch in millimetres from your sprocket catalogue. If marked with ANSI numbers (40, 50, 60, 80), confirm the inch pitch. We can manufacture chains to run on both sprocket systems if needed. For mixed-fleet operations with both ANSI and ISO equipment, we maintain stock of the most common sizes in both standards and can supply a compatibility cross-reference table on request.

What technical support is available after purchase, particularly if I need assistance with chain selection for a new machine?

Post-purchase technical support includes chain selection assistance, dimensional queries, and troubleshooting for premature wear or fatigue failures. Our engineering team is available Monday to Friday, AEST 9:00–17:00, via email and WhatsApp. For complex selection problems — such as matching a chain to a non-standard agricultural implement or adapting a discontinued OEM specification — we ask customers to submit a technical query form with machine data (operating speed, load estimate, operating environment). Responses are typically provided within 1 business day. For Australian-based OEM machine builders, we can arrange a technical consultation call to assist with chain drive system specification as part of our OEM support programme.

Get in Touch — Source Your Pintle Chain with Attachment Today

Ready to Source Pintle Chain with Attachment for Your Australian Operation?

Dapatkan harga kompetitif, kompatibilitas yang terkonfirmasi, dan dokumentasi teknis terperinci — dikirim dalam waktu 24 jam kerja setelah permintaan Anda.

✉️ [[email protected]] | 

⏱️

Trusted by OEM buyers across Australia, North America, and Europe for consistent quality and on-time delivery.

Informasi Tambahan

Edited

Zqq

Produk Terkait