{"id":2261,"date":"2026-05-08T09:29:55","date_gmt":"2026-05-08T09:29:55","guid":{"rendered":"https:\/\/www.agriculturalparts.top\/application\/pto-shaft-for-deep-placement-applicator\/"},"modified":"2026-05-08T09:29:55","modified_gmt":"2026-05-08T09:29:55","slug":"pto-shaft-for-deep-placement-applicator","status":"publish","type":"post","link":"https:\/\/www.agriculturalparts.top\/it\/application\/pto-shaft-for-deep-placement-applicator\/","title":{"rendered":"PTO Shaft for Deep Placement Applicator"},"content":{"rendered":"

PTO Shaft for Deep Placement Applicator \u2014 Precision Subsurface Nutrient Drive for Maximum Crop Uptake<\/h2>\n

The deep placement applicator PTO shaft<\/strong> \u2014 also known as a subsurface fertiliser applicator driveshaft<\/em>, knife applicator cardan shaft<\/em>, or deep-band placement PTO driveline<\/em> \u2014 powers the soil-opening, fertiliser metering, and optionally the hydraulic downforce control systems on machines designed to place fertiliser (typically urea, DAP, or liquid nitrogen) at precisely defined depths of 80\u2013200 mm below the soil surface, where root interception and nutrient use efficiency are maximised compared to surface broadcasting.<\/p>\n

Deep placement applicators fall into two broad categories: (1) Tined applicators<\/strong> that use rigid or spring-release tines to create a narrow slit at working depth into which a metered flow of fertiliser is deposited \u2014 these are commonly PTO-powered for their metering and optional hydraulic circuits; and (2) Combined tillage-placement units<\/strong> (such as the Australian-developed Flexi-N and Graintec deep-banders) that incorporate a powered tillage rotor or vibrating tine ahead of the placement knife, requiring a much more powerful PTO input. Our shaft range covers both categories.<\/p>\n

\"Deep<\/p>\n

Browse our precision nutrient application PTO shaft range<\/a> or talk to our agronomic machinery team<\/a> about deep placement system specifications.<\/p>\n

Technical Specifications \u2014 PTO Shaft for Deep Placement Applicator<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nStandard Value \/ Configuration<\/th>\nCustomisable Range<\/th>\n<\/tr>\n<\/thead>\n
Series (metering-only)<\/td>\nSeries 3 \/ Series 4 (fan\/pump drive)<\/td>\nSeries 3\u20135<\/td>\n<\/tr>\n
Series (combined tillage unit)<\/td>\nSeries 6 \/ Series 7<\/td>\nSeries 5\u20138<\/td>\n<\/tr>\n
PTO Speed<\/td>\n540 RPM (std); 1000 RPM (fan drive)<\/td>\n540 \/ 1000 RPM<\/td>\n<\/tr>\n
Power Rating (metering only)<\/td>\nUp to 30 kW<\/td>\n8\u201355 kW<\/td>\n<\/tr>\n
Power Rating (tillage+placement)<\/td>\nUp to 120 kW<\/td>\n55\u2013180 kW<\/td>\n<\/tr>\n
Continuous Torque (metering)<\/td>\n350 N\u00b7m<\/td>\n80\u2013700 N\u00b7m<\/td>\n<\/tr>\n
Continuous Torque (tillage)<\/td>\n2,000 N\u00b7m<\/td>\n900\u20134,000 N\u00b7m<\/td>\n<\/tr>\n
Compressed Length<\/td>\n580\u2013950 mm<\/td>\n450\u20131,800 mm<\/td>\n<\/tr>\n
Extended Length<\/td>\n900\u20131,550 mm<\/td>\n680\u20132,600 mm<\/td>\n<\/tr>\n
Tube Profile<\/td>\nTri\/Lemon (S3\/S4) \u00b7 Star\/Hex (S6\/S7)<\/td>\nLemon \/ Tri \/ Star \/ Hex<\/td>\n<\/tr>\n
Universal Joint<\/td>\nCV joint (standard for both types)<\/td>\nCV \u00b130\u00b0 to \u00b145\u00b0<\/td>\n<\/tr>\n
Overload Protection (S3\/S4)<\/td>\nFriction clutch<\/td>\nFriction \/ Shear bolt<\/td>\n<\/tr>\n
Overload Protection (S6\/S7)<\/td>\nCam torque limiter<\/td>\nCam \/ Friction<\/td>\n<\/tr>\n
Slip Torque (S3\/S4)<\/td>\n280\u2013500 N\u00b7m<\/td>\n80\u2013900 N\u00b7m<\/td>\n<\/tr>\n
Slip Torque (S6\/S7)<\/td>\n1,800\u20133,000 N\u00b7m<\/td>\n900\u20135,500 N\u00b7m<\/td>\n<\/tr>\n
Guard Type<\/td>\nPE full-cone (both series)<\/td>\nFull \/ Half cone PE<\/td>\n<\/tr>\n
Grease Interval<\/td>\nEvery 8 hours (sealed: 25 hrs)<\/td>\n8\u201350 hrs<\/td>\n<\/tr>\n
Fertiliser Compatibility<\/td>\nAll granular; NH3 environment option<\/td>\nNH3-resistant seals optional<\/td>\n<\/tr>\n
Surface Finish<\/td>\nZinc phosphate + grey enamel<\/td>\nVarious<\/td>\n<\/tr>\n
Operating Temp Range<\/td>\n-25 \u00b0C to +80 \u00b0C<\/td>\n-40 \u00b0C to +100 \u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Working Principle of the Deep Placement Applicator PTO Shaft<\/h2>\n

In a tined deep-placement fertiliser applicator<\/strong> (fan\/pump metering type), the PTO shaft drives a centrifugal blower or positive-displacement metering fan that generates the airflow or mechanical force to convey granular fertiliser from the hopper through distribution lines to each individual placement knife opener. The knives themselves are ground-driven (press-wheel or cultivator frame), so the PTO shaft load is purely the fan\/pump drive \u2014 typically 10\u201325 kW in a 9-to-12 row machine. The shaft runs at 540 RPM and drives through a compact bevel gearbox on the machine frame. Precise metering consistency \u2014 one granule per millimetre of tube conveying distance \u2014 requires a consistent, vibration-free shaft speed input.<\/p>\n

In a combined tillage and deep-placement machine<\/strong> (such as a deep-bander with powered disc or tine ahead of the knife), the PTO shaft faces a dramatically heavier duty: driving the soil-opening element at depth (40\u201380 cm) while maintaining the metering function. This is mechanically analogous to a powered subsoiler with integrated metering, and the shaft specification follows Series 6\/7 deep-cultivator engineering principles, with a cam torque limiter and hex\/star tube for maximum torque capacity.<\/p>\n

\"Deep<\/p>\n

Core Advantages of Our PTO Shaft for Deep Placement Applicator<\/h2>\n
\n
\n

Optimised for Two Application Types<\/strong><\/p>\n

We offer Series 3\/4 (fan\/metering drive) and Series 6\/7 (combined tillage placement) shafts \u2014 ensuring each application type receives the precisely correct engineering, not an over-specified or under-specified compromise.<\/p>\n<\/div>\n

\n

Consistent Metering Speed<\/strong><\/p>\n

Fan-drive shafts balanced to G6.3 at 540 RPM deliver constant airflow to all distribution lines \u2014 preventing differential pneumatic pressure that causes uneven fertiliser distribution between rows.<\/p>\n<\/div>\n

\n

NH\u2083-Resistant Seal Option<\/strong><\/p>\n

For anhydrous ammonia (NH\u2083) deep-band applicators, we supply cross-kits with Viton (FKM) sealed bearing cups that resist the aggressive chemical attack of anhydrous ammonia on standard NBR rubber seals.<\/p>\n<\/div>\n

\n

Precision Agriculture Integration<\/strong><\/p>\n

Consistent shaft speed supports ISOBUS-connected deep-placement rate controllers that adjust metering gate aperture based on GPS speed \u2014 any shaft-induced speed variation causes rate errors visible in soil sampling data.<\/p>\n<\/div>\n

\n

Variable Length Options<\/strong><\/p>\n

Deep placement machines have highly variable tractor-to-machine geometry depending on toolbar length and hitch type. We offer shaft lengths from 580 mm compressed to 1,800 mm extended \u2014 covering the full range of Australian deep-bander configurations.<\/p>\n<\/div>\n

\n

Australian-Made Application Support<\/strong><\/p>\n

We understand locally developed deep placement systems (Graintec, Flexi-N, Australian Ag, Stockdale) \u2014 our engineers have direct experience with Australian nutrient placement machinery that offshore suppliers typically do not.<\/p>\n<\/div>\n<\/div>\n

Brand Compatibility, Spare Parts & Cross-References<\/h2>\n

Our pto shaft for deep placement applicator<\/strong> is engineered as a direct drop-in replacement<\/strong> for OEM shafts supplied on: Graintec, Australian Ag, Stockdale, Flexi-N, Horsch, Amazone, Vaderstad, Bourgault<\/strong>. Our live cross-reference database (12,000+ entries) confirms exact fitment before dispatch \u2014 eliminating costly returns.<\/p>\n

\u26a0\ufe0f Disclaimer: All brand names are cited to assist operators in identifying compatible PTO shaft replacement parts. No commercial relationship with any listed brand is claimed.<\/em><\/p>\n

Spare parts stocked separately:<\/strong> Cross-kits (open \/ IP55 \/ IP67 \/ Viton-seal) \u00b7 Locking yoke collars \u00b7 Friction disc sets \u00b7 Cam spring kits \u00b7 Guard sets \u00b7 Replacement tubes \u00b7 Grease nipples (DIN\/BSP\/Metric) \u00b7 Shear bolt kits<\/p>\n

\u2192 Browse all PTO shaft spare parts and accessories<\/a><\/p>\n

Compliance, Standards & Regional Market Demand<\/h2>\n

Applicable Standards & Regulations:<\/strong> Standards: ISO 5673-1:2014, ASABE S203.12. Anhydrous ammonia (NH\u2083) applications: additional requirements under Dangerous Goods Regulations (State-specific) and Safe Work Australia COP for ammonia; PTO shaft in NH\u2083 applications must use NH\u2083-compatible seal materials. GRDC nutrient placement efficiency research supports deep placement as a best-management practice \u2014 consistent shaft performance is part of the system. NRM\/EPA separation distance regulations apply to nutrient application near waterways.<\/p>\n

Key Australian Demand Regions:<\/strong> Key regions for deep placement: WA Wheatbelt (deep-banding P and N), Eyre Peninsula SA, Wimmera\/Mallee VIC, Darling Downs QLD (cotton deep-banded N), Central NSW (wheat\/canola), NT tropical cropping.<\/p>\n

All products are dispatched with CE Declaration of Conformity (where applicable), ISO material certifications, dimensional inspection reports, and surface treatment test certificates. GST-inclusive AUD invoicing available for Australian buyers.<\/p>\n

Quick Selection Guide \u2014 PTO Shaft for Deep Placement Applicator<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n
Selection Parameter<\/th>\nHow to Determine<\/th>\nSelection Guidance<\/th>\n<\/tr>\n<\/thead>\n
Applicator type<\/td>\nFan\/metering only \/ Combined tillage<\/td>\nFan\/metering: Series 3\/4; Combined tillage: Series 6\/7<\/td>\n<\/tr>\n
Working depth<\/td>\n80\u2013200 mm<\/td>\nDeeper = more soil resistance = heavier shaft if tillage element present<\/td>\n<\/tr>\n
Number of rows<\/td>\n4\u201324 rows<\/td>\nMore rows = more metering fan load if single-fan design<\/td>\n<\/tr>\n
Fertiliser type<\/td>\nGranular \/ Liquid \/ Anhydrous NH\u2083<\/td>\nNH\u2083: specify Viton seal option \u2014 mandatory<\/td>\n<\/tr>\n
PTO speed required<\/td>\n540 RPM (fan); 1000 RPM (large fan)<\/td>\nConfirm on machine specification plate<\/td>\n<\/tr>\n
Tractor-machine geometry<\/td>\nMeasure compressed\/extended at field pos<\/td>\nDeep banders often have long toolbar distance \u2014 measure carefully<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Step-by-Step Installation Guide \u2014 PTO Shaft for Deep Placement Applicator<\/h2>\n
    \n
  1. [NH\u2083 safety \u2014 critical]<\/strong> For NH\u2083 applications: full chemical PPE mandatory (respirator, face shield, chemical-resistant gloves) before PTO work.<\/li>\n
  2. [Setup position]<\/strong> Hitch applicator; lower toolbar to working depth on prepared ground for geometry measurement.<\/li>\n
  3. [Length measurement]<\/strong> Measure PTO stub to applicator fan\/gearbox input; confirm correct shaft compressed and extended length.<\/li>\n
  4. [Anti-seize application]<\/strong> Apply PTFE anti-seize to tractor PTO splines (NH\u2083 use: use NH\u2083-resistant anti-seize paste).<\/li>\n
  5. [Tractor connection]<\/strong> Install tractor-end CV yoke; engage locking pin.<\/li>\n
  6. [Machine connection]<\/strong> Install machine-end CV yoke onto applicator gearbox\/fan input; tighten collar to 25\u201330 N\u00b7m.<\/li>\n
  7. [Guard setup]<\/strong> Verify full-cone guard is fitted; both anchor chains secure.<\/li>\n
  8. [Calibration]<\/strong> Calibration run: engage PTO at idle, check fan speed with tachometer against specification; run calibration tray for metering consistency check.<\/li>\n
  9. [Lubrication]<\/strong> Grease all nipples before first field use; repeat at 8-hour intervals (25 hours for sealed kits).<\/li>\n<\/ol>\n

    \"PTO<\/p>\n

    \ufe0f Troubleshooting \u2014 Common PTO Shaft Issues & Solutions<\/h2>\n
    \n\u26a0\ufe0f Uneven fertiliser distribution between rows<\/summary>\n
    \n

    Root Cause:<\/strong> PTO shaft speed variation from worn cross-joint; fan imbalance<\/p>\n

    Fix:<\/strong> Replace cross-kit; rebalance fan; check shaft balance at 540 RPM<\/p>\n<\/div>\n<\/details>\n

    \n\u26a0\ufe0f Fan not reaching rated RPM under field load<\/summary>\n
    \n

    Root Cause:<\/strong> Shaft clutch slipping; tractor PTO HP insufficient for machine width<\/p>\n

    Fix:<\/strong> Check clutch preload; verify tractor PTO HP meets machine requirement<\/p>\n<\/div>\n<\/details>\n

    \n\u26a0\ufe0f NH\u2083 odour from cross-joint area<\/summary>\n
    \n

    Root Cause:<\/strong> Standard NBR seals degraded by NH\u2083; gas permeating through seal<\/p>\n

    Fix:<\/strong> Immediately stop work; upgrade to Viton-seal cross-kit; ammonia exposure is a serious health risk<\/p>\n<\/div>\n<\/details>\n

    \n\u26a0\ufe0f Cam clutch over-cycling on combined tillage applicator<\/summary>\n
    \n

    Root Cause:<\/strong> Hard pan or embedded rock at working depth; cam set too low<\/p>\n

    Fix:<\/strong> Increase cam spring tension; pre-rip particularly hard areas before deep-banding<\/p>\n<\/div>\n<\/details>\n

    \n\u26a0\ufe0f Granules not clearing tube after fan engagement<\/summary>\n
    \n

    Root Cause:<\/strong> Fan not at sufficient speed to build pneumatic pressure at engagement<\/p>\n

    Fix:<\/strong> Engage PTO at 800+ RPM; allow fan to reach speed before opening metering gates<\/p>\n<\/div>\n<\/details>\n

    Engineer’s Field Notes \u2014 Australian Case Studies<\/h2>\n
    \n
    \n

    Wongan Hills, WA<\/p>\n

    P and N deep-banding \u2014 Graintec Mustang deep-bander, 12 rows<\/p>\n

    “”Western Australian farmers have been deep-banding for 30 years. Your Series 4 fan-drive shaft is the most reliable we’ve used \u2014 consistent spread across all 12 rows confirmed by soil probe.””<\/p>\n<\/div>\n

    \n

    Pinnaroo, SA<\/p>\n

    Mallee deep-banding phosphorus on low-P soils<\/p>\n

    “”Non-standard shaft length for our old Stockdale machine. You made the custom length, confirmed the spline match, and had it to us in 6 days. Machine is 20 years old and still going.””<\/p>\n<\/div>\n

    \n

    Narrabri, NSW<\/p>\n

    Cotton deep-banded N \u2014 anhydrous ammonia application<\/p>\n

    “”NH\u2083 use is non-negotiable on Viton seals \u2014 NH\u2083 destroys NBR in one season. Your Viton option is the only shaft we’ll use for NH\u2083. Properly specified product.””<\/p>\n<\/div>\n

    \n

    Emerald, QLD<\/p>\n

    Irrigated sorghum \u2014 deep P and Zn placement<\/p>\n

    “”Combined tillage-placement machine, Series 7 cam clutch shaft. Hit a buried irrigation concrete at 160 mm depth \u2014 cam clutch saved the gearbox. Machine back running in 10 minutes.””<\/p>\n<\/div>\n

    \n

    Katherine, NT<\/p>\n

    Tropical deep-banding for wet-season cropping<\/p>\n

    “”NT conditions are extreme \u2014 heat, wet, and red sandy soil. Your shaft survived the wet season without any corrosion on the epoxy-finished tube. Very happy with the quality.””<\/p>\n<\/div>\n<\/div>\n

    \u2753 Frequently Asked Questions<\/h2>\n
    \nWhat is deep placement of fertiliser and why does PTO shaft quality matter?<\/summary>\n
    Deep placement involves opening a narrow slit in the soil at 80\u2013200 mm depth using a knife-type opener and depositing a band of fertiliser (typically P, N, or micro-nutrients) directly into the root zone, rather than broadcasting on the surface. Research shows deep-placed phosphorus can improve P uptake efficiency by 30\u201360% compared to surface application on deep sandy soils. The PTO shaft powers the metering system that determines how consistently the fertiliser is delivered to each knife at the target rate \u2014 inconsistent shaft speed causes rate errors that directly impact the economics of the deep placement investment.<\/div>\n<\/details>\n
    \nDo I need a special PTO shaft for anhydrous ammonia (NH\u2083) deep placement?<\/summary>\n
    Yes \u2014 this is critical. Anhydrous ammonia is an extremely aggressive chemical that rapidly destroys standard NBR rubber seals used in conventional cross-kit bearing cups. NBR seal degradation allows NH\u2083 to contact the bearing steel, causing corrosion and catastrophic cross-kit failure, potentially releasing the shaft yoke. For any NH\u2083 application, specify cross-kits with Viton (FKM) seals that are chemically resistant to anhydrous ammonia. This is a safety requirement, not just a maintenance consideration.<\/div>\n<\/details>\n
    \nWhat is the difference between a fan-metering-only deep placement shaft and a combined tillage shaft?<\/summary>\n
    A fan-metering-only applicator uses the PTO only to power the pneumatic fan or mechanical metering drive \u2014 the soil-opening knives are ground-driven (pushed through the soil by tractor draft). This requires a light Series 3\/4 shaft. A combined tillage-placement machine powers both a soil-opening tillage element (rotating disc, vibrating tine, or powered rotor) AND the metering system from the same PTO shaft \u2014 generating far higher torque demands requiring a Series 6\/7 shaft. Always check which type your applicator is before ordering.<\/div>\n<\/details>\n
    \nCan I use my standard air-seeder drill PTO shaft on my deep placement applicator?<\/summary>\n
    Only if both are fan-drive-only machines of similar rated power. If your deep placement applicator has a combined powered tillage element, the air-seeder shaft is far undersized. Additionally, deep placement machines used with anhydrous ammonia require Viton seal cross-kits regardless of shaft series. Check all three criteria (power rating, application type, and fertiliser chemistry) before reusing an existing shaft.<\/div>\n<\/details>\n
    \nHow does deep placement precision compare between PTO-driven and ground-driven metering systems?<\/summary>\n
    PTO-driven fan or metering systems provide consistent delivery rate regardless of soil conditions or ground-drive slip \u2014 the metering rate depends on PTO shaft speed (constant) rather than ground wheel rotation (variable). Ground-driven systems experience rate errors whenever the drive wheel slips \u2014 common at headlands, on slopes, and in loose seedbed conditions. For variable-rate deep placement on precision agriculture paddocks where rate consistency across the full field is critical, PTO-driven metering with a quality balanced shaft is strongly preferred.<\/div>\n<\/details>\n

    Related Products \u2014 Agricultural Gearboxes & PTO Accessories<\/h2>\n

    We manufacture the complete drivetrain ecosystem. Our agricultural gearboxes<\/a> are engineered to pair with our PTO shafts for minimised system vibration and matched torque ratings.<\/p>\n

    \n
    \n\"Agricultural<\/p>\n

    Agricultural PTO Gearbox<\/p>\n

    Bevel, right-angle, and inline gearboxes for all spreader and applicator drive configurations.<\/p>\n

    View Gearboxes<\/a>\n<\/div>\n

    \n\"PTO<\/p>\n

    Cross-Kits & Overload Clutches<\/p>\n

    IP55 sealed, Viton-seal, and standard cross-kits; friction disc sets; cam spring kits.<\/p>\n

    View Accessories<\/a>\n<\/div>\n

    \n\"PTO<\/p>\n

    Guards & Safety Components<\/p>\n

    Full-cone and half-cone PE guards; chemical-resistant versions; retaining chains and strap kits.<\/p>\n

    View Guards<\/a>\n<\/div>\n<\/div>\n

    Partner with Us \u2014 OEM, Wholesale & Direct Supply<\/h2>\n
    \n

    Source a Reliable PTO Shaft for Deep Placement Applicator Today<\/h3>\n

    Whether you need a single replacement shaft urgently or are establishing a long-term supply relationship for a dealer or OEM production line, our team is ready:<\/p>\n

      \n
    • \u2705 Cross-reference confirmed before dispatch \u2014 zero guesswork returns<\/li>\n
    • \u2705 Custom lengths, splines, clutch settings, and seal specifications to your requirements<\/li>\n
    • \u2705 Volume pricing for agricultural dealers, machinery importers, and OEM accounts<\/li>\n
    • \u2705 Express Australia-wide freight \u2014 same-day dispatch on stocked configurations<\/li>\n
    • \u2705 Full compliance documentation packa
      ","protected":false},"excerpt":{"rendered":"

      PTO Shaft for Deep Placement Applicator \u2014 Precision Subsurface Nutrient Drive for Maximum Crop Uptake The deep placement applicator PTO shaft \u2014 also known as a subsurface fertiliser applicator driveshaft, knife applicator cardan shaft, or deep-band placement PTO driveline \u2014 powers the soil-opening, fertiliser metering, and optionally the hydraulic downforce control systems on machines designed […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[2211],"tags":[3196,1752,3197,819,1155],"class_list":["post-2261","post","type-post","status-publish","format-standard","hentry","category-pto-shaft","tag-agricultural-pto-shaft","tag-pto-drive-shaft","tag-pto-driveline","tag-pto-shaft","tag-tractor-pto-shaft"],"_links":{"self":[{"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/posts\/2261","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/comments?post=2261"}],"version-history":[{"count":0,"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/posts\/2261\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/media?parent=2261"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/categories?post=2261"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.agriculturalparts.top\/it\/wp-json\/wp\/v2\/tags?post=2261"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}