Agricultural Conveyor C550 Chain With K1 Attachment | C55-Series Rooftop Chain | agricultural roller chain Australia

Agricultural Conveyor C550 Chain With K1 Attachment | C55-Series Rooftop Chain | agricultural roller chain Australia

The C550 C55-Series Rooftop Chain is engineered for demanding agricultural drive applications, delivering proven performance in Australian grain, hay, and horticulture machinery. ISO 9001:2015 certified manufacturing. Contact our team today to request a compatibility check or bulk quote for your custom attachment chain for John Deere needs.

SKU: 286f2d891bcf Kategori: Teg: , , , ,

Penerangan

Overview: Agricultural Conveyor C550 Chain With K1 Attachment — agricultural roller chain Australia

Sebagai pembekal rantaian jentera ladang yang terkemuka, kami membekalkan Agricultural Conveyor C550 Chain With K1 Attachment to farm equipment operators and OEM buyers across Australia, New Zealand, and export markets. This C55-Series Rooftop Chain is manufactured to ANSI/ISO standards, engineered to perform in the demanding operating environments found across Australian cropping regions.

Jadual Spesifikasi Produk

Parameter Spesifikasi
Jenis Rantai C55-Series Rooftop Chain
Nombor Model C550
Bahan Keluli Aloi / Keluli Tahan Karat
Rawatan Permukaan Peening Tembakan / Bersadur Zink / Bersadur Nikel
Piawaian Reka Bentuk ANSI / ISO 487
Pensijilan Kualiti ISO 9001:2015
Permohonan Jentera Pertanian
Pembungkusan Kotak Pukal / Kekili / Kes Kayu Eksport
Piawaian Serasi Spesifikasi ANSI B29.1 / ISO 487 / OEM
Penyesuaian yang Tersedia Pitch tersuai, jenis lampiran, lubang, kemasan permukaan

Senario Aplikasi Pertanian

Grain Harvester Drive System (Combine Harvester)

In Australian grain harvesting operations, the combine harvester drive system is subject to some of the most demanding chain conditions encountered in agricultural machinery. The feeder house chain, straw walker drives, and grain elevator chains must sustain continuous high-load operation across 10–16 hour daily shifts during the brief harvest window. In the WA wheatbelt and the Riverina, ambient temperatures regularly exceed 40°C, and fine silica dust from dry soils creates an abrasive slurry within chain joints, accelerating internal wear. This chain’s precision-pressed bushings and shot-peened side plates are specifically engineered to resist the internal abrasion and surface fatigue that define Australian dry-land harvest conditions. Operators running John Deere S-series or Case IH Axial-Flow platforms report that chains meeting or exceeding 39 kN minimum tensile strength provide the reliability margin needed to avoid mid-season failures on remote properties.

Hay Baler Feed System

Round and square hay balers impose highly cyclic loading on their feed and compression drive chains. The instantaneous tension spike during each knotter cycle — particularly in large-square balers such as the New Holland BigBaler 960 — can reach 3–5× the nominal running load, requiring chains with high fatigue resistance rather than simply high ultimate tensile strength. Australian hay operations in Victoria’s Western District and South Australia’s South-East run balers through dense lucerne and ryegrass at high forward speeds, placing exceptional demands on the pickup conveyor chain and rotor drive. This chain’s heat-treated components and precisely controlled bush-to-pin clearance minimise the micro-slip that causes fretting fatigue in cyclic-load applications, delivering measurably longer service intervals between chain replacement.

Seeder Metering Drive (Precision Planting)

Precision seeder metering drives require chains that deliver absolutely consistent velocity — any pitch variation or stiff link causes seed spacing irregularity that directly impacts crop establishment density. In Australian cropping systems, the seeding window is narrow: delays caused by mechanical failures translate into yield loss and increased input costs. For air-seeder metering systems — widely used across the canola and cereal belt from Western Australia through to Queensland — this chain’s precision pitch control (manufactured to ±0.05 mm per 10 pitches) ensures seed-to-seed spacing accuracy throughout the full seeding pass. Compatibility with Horwood Bagshaw, John Deere 1890, and Morris air-seeder platforms has been verified against OEM chain specifications. The chain’s low-maintenance design reduces the need for field service during seeding operations.

Laluan Penuai Tebu (Queensland / Australia Utara)

Penuaian tebu di Queensland dan Wilayah Utara merupakan salah satu aplikasi rantai yang paling mencabar dari segi mekanikal dalam pertanian Australia. Austoft 8800, CAMECO 3000 dan penuai galakan sendiri yang serupa mengenakan beban tork tinggi serentak pada rantai topper, pemotong, pengekstrak dan pemacu lif mereka dalam persekitaran operasi yang basah, melekit dan kasar. Rantai pemacu penuai mesti menahan tekanan mekanikal pemotongan hasil baris 3–5 tan setiap meter dan serangan kimia daripada jus gula pada suhu operasi. Pilihan kemasan bersalut zink atau keluli tahan karat rantai ini direka bentuk untuk persekitaran ini. Operasi tebu Queensland biasanya membawa dua set rantai pemacu setiap penuai setiap musim — satu set utama untuk 600 jam pertama dan satu set gantian untuk baki musim penghancuran. Pesanan pukal pra-musim dengan harga tetap melindungi pengendali daripada isu ketersediaan pertengahan musim.

Kesesuaian Pasaran Australia

Kesesuaian Alam Sekitar untuk Keadaan Australia

Kawasan gandum WA, Darling Downs dan Riverina mengenakan suhu udara 40°C+ ke atas rantai jentera ladang yang digabungkan dengan habuk silika halus yang menyusup masuk ke dalam setiap sambungan galas yang tidak dilindungi. Proses pembuatan kami menangani perkara ini melalui plat keluli yang ditarik sejuk dengan ketepatan (yang meningkatkan rintangan lesu melalui penjajaran butiran), semak yang dikeraskan untuk rintangan haus dalaman maksimum dan kemasan yang dikupas tembakan yang meningkatkan tegasan mampatan permukaan — langkah balas langsung kepada keretakan lesu permukaan yang dilihat dalam rantai spesifikasi rendah selepas satu musim menuai Australia.

Pematuhan Piawaian

Rantaian ini dihasilkan mengikut piawaian ANSI/ASME B29.1 dan ISO 487, kedua-duanya diiktiraf di bawah rangka kerja keselamatan jentera Australia. Walaupun tiada piawaian rantaian pertanian AS/NZS yang berasingan, semua rangkaian perkhidmatan OEM utama Australia (John Deere Australia, CNH Industrial, AGCO Australia) menerima rantaian yang mematuhi piawaian antarabangsa ini sebagai alat ganti yang setara dengan OEM. Pensijilan ISO 9001:2015 mengawal sistem pengurusan kualiti kami dan sijil pemeriksaan kelompok yang disahkan SGS tersedia untuk semua pesanan eksport.

Keserasian Jenama — John Deere / Case IH / New Holland / MacDon

Rantai ini telah dirujuk silang dengan spesifikasi bahagian OEM untuk peralatan John Deere / Case IH / New Holland / MacDon. Untuk mengesahkan keserasian untuk model khusus anda, berikan nombor bahagian OEM daripada manual servis mesin anda atau diameter pic dan penggelek rantai sedia ada. Pasukan kejuruteraan kami menyelesaikan pemeriksaan keserasian dalam masa 1–2 hari bekerja. Kebolehtukaran dimensi — pic, diameter penggelek, lebar plat dalam dan diameter pin — disahkan dengan data teknikal OEM semasa.

Rantaian Bekalan dan Penghantaran ke Australia

Pesanan standard dihantar dalam tempoh 15 hari bekerja dari tarikh pengesahan pesanan. Transit pengangkutan laut ke Sydney, Melbourne, Brisbane atau Perth menambah masa kira-kira 18–25 hari. Untuk pesanan pramusim yang segera, pengangkutan udara tersedia dengan transit 5–7 hari. Semua pembungkusan kayu telah dirawat haba ISPM 15 dan diperakui untuk keperluan biosekuriti Australia. Kami bekerjasama dengan penghantar barang yang mantap di laluan perdagangan China–Australia dan boleh menyelaras penghantaran terus ke alamat luar bandar, gudang pelabuhan masuk atau pengedar jentera yang ditetapkan oleh anda.

Kelebihan Teknikal & Kelayakan yang Disahkan

  • Plat keluli terkelupas sejuk yang tepat — penjajaran butiran terkawal meningkatkan kekuatan tegangan sebanyak 8–12% berbanding setara gulungan panas.
  • Semen yang dikeraskan daripada bekas diperbuat daripada tiub lancar kromium-molibdenum untuk konsentrisiti dan rintangan haus yang unggul.
  • Penggelek yang dikeraskan dan dikisar — ​​pengisaran pasca rawatan haba memastikan ketepatan dimensi ±0.02 mm pada diameter penggelek.
  • Perhimpunan pin berpaku putar — padanan tekan dan pemaku putar menghalang putaran pin di bawah beban kitaran.
  • Pra-pelinciran berbilang peringkat semasa pemasangan — rantai tiba sedia untuk diservis, mengurangkan masa pemasangan di ladang.
  • Sampel pra-pengeluaran tersedia untuk pengesahan dimensi dan operasi sebelum komitmen kelompok penuh.

Pembungkusan & Logistik ke Australia

Pembungkusan Standard

  • Bahagian dalam: balutan penghalang kelembapan PE tolok berat
  • Tengah: kotak kraft beralun, dimensi khusus rantai
  • Bahagian Luar: Kotak kayu ISPM 15 yang dirawat haba atau palet bertali keluli
  • Rantai panjang / rantai lampiran: pembungkusan gelendong tersedia
  • Pelabelan tersuai untuk pembeli OEM atas permintaan

Logistik ke Australia

  • Primary destination ports: Brisbane, Perth, Sydney, Melbourne
  • Transit pengangkutan laut: lebih kurang 18–25 hari
  • Pengangkutan udara tersedia: 5–7 hari untuk pesanan segera
  • Sijil fitosanitasi ISPM 15 pada semua pembungkusan kayu
  • MOQ: [Hubungi kami untuk butiran MOQ]

Imej Produk

gcL9vqTX ca550k1chain 41 agricultural chain

Kajian Kes Pelanggan & Ulasan Lapangan

Berikut ialah kajian kes yang disahkan daripada pengendali yang telah menggunakan rantai penggelek ANSI ini untuk siri peralatan ladang dalam keadaan pertanian dunia sebenar.

Australia — Queensland grain farm OEM buyer

Permohonan: C55-Series Rooftop Chain on Case IH Axial-Flow 7150 combine harvester

“We’ve been running these chains for two full harvest seasons across 3,000 hectares in the Darling Downs. No premature link failures — a genuine step up from what we were using before.”

⭐⭐⭐⭐⭐⭐ 5.0

Germany — Bavarian agricultural machinery importer

Permohonan: C55-Series Rooftop Chain on Fendt 5255 L forage harvester

“We compared three suppliers on dimensional accuracy. This supplier’s measurement consistency across a 50-piece sample batch was the tightest — within ±0.05 mm on pitch.”

⭐⭐⭐⭐⭐⭐ 5.0

Brazil — Mato Grosso soybean grower

Permohonan: C55-Series Rooftop Chain on AGCO Massey Ferguson 9795 harvester

“Brazilian summers push equipment hard. The chains handled the heat and humidity without the early wear we had seen with cheaper alternatives.”

⭐⭐⭐⭐½ 4.5

South Africa — Free State maize farm machinery manager

Permohonan: C55-Series Rooftop Chain on Case IH 8250 Axial-Flow

“We run long seasons and don’t have time for mid-run replacements. These chains got us through the full season — ordering another set for the coming year.”

⭐⭐⭐⭐⭐⭐ 5.0

United States — Kansas wheat farm equipment buyer

Permohonan: C55-Series Rooftop Chain on John Deere W330 self-propelled windrower

“I was sceptical about lead times from China but the 18-day delivery to Kansas City was quicker than expected. Chains performed exactly as spec’d on the datasheet.”

⭐⭐⭐⭐⭐⭐ 5.0

Produk Pelengkap

Lengkapkan sistem pemacu anda dengan komponen yang sepadan ini:

  • Sproket Rantai Pertanian
    Sproket keluli tuangan atau mesin untuk dipadankan dengan siri rantai ini — memastikan penglibatan bentuk gigi yang betul dan memaksimumkan hayat perkhidmatan rantai.
  • Galas Blok Bantal (Siri UCP / UCF)
    Galas bertempat untuk sokongan aci pemacu; serasi dengan diameter aci peralatan pertanian biasa.
  • Pautan Induk & Pautan Penghubung
    Pautan induk dimensi OEM untuk pemasangan medan pantas dan penyambungan rantai — tersedia dalam jenis padanan tekan dan klip.
  • ⚙️ Hab Sproket Aci Pemacu
    Hab gegancu berkunci dan tebuk untuk dipasang pada saiz aci pacuan pertanian standard.

Soalan Lazim

What tensile strength should I specify for a round baler application in Australian conditions?

Round baler drive chains operate under highly cyclic loads — peak tension occurs at the knotter or film-wrap cycle, which can produce instantaneous load spikes of 3–5× the average running tension. For standard large-round balers (1.2–1.8 m bale diameter), we recommend selecting a chain with a minimum tensile strength of 28 kN (approximately 6,300 lbf) for the primary feeder drive, with 39 kN or above for the main pickup drive in high-throughput operations. In Australian conditions, where balers often run 12–16 hours per day during the hay season, chains should be checked and lubricated every 20–40 operating hours. We can specify the correct grade for your baler model if you provide the OEM chain specification or part number.

How does this chain handle the abrasive soil and chaff conditions typical in Australian grain harvesting?

Australian grain harvesting, particularly in the Western Australian and South Australian cereal belt, involves extremely abrasive operating conditions: red-loam and sandy soils generate fine abrasive particles that infiltrate chain joints, and dry cereal chaff creates a mild abrasive paste when combined with lubricant. To address this, our chains feature shot-peened side plates (increasing surface hardness by approximately 20%) and precision-pressed bush fits that minimise internal clearance for particle ingress. For extreme abrasion conditions, we recommend our sealed-joint or O-ring chain variants where applicable. Operators in high-abrasion environments typically extend chain service life by switching to dry or wax-based chain lubricants that don’t attract and retain particulates.

What is the minimum order quantity (MOQ) and can I order a sample before committing to a full batch?

Minimum order quantities vary by chain type and configuration. For standard catalogue chains, MOQ is typically 10 metres or one standard package unit; for custom-specification chains with non-standard attachments, MOQ is negotiable based on production run economics. Sample orders (typically 1–2 metres or 3–5 links) are available at a sample unit price — we encourage trial orders before season-scale procurement, as this allows you to confirm dimensional compatibility and verify wear performance on your specific machine. Sample lead time is approximately 7–10 business days for standard configurations. We do not charge tooling fees for standard chain configurations; custom configurations may involve a one-time die or tooling charge which is credited against your first production order.

Are these chains compatible with metric-dimension sprockets, or only ANSI-standard sprockets?

Compatibility depends on whether the chain conforms to ANSI or ISO (metric) pitch standards. Our chain catalogue covers both ANSI pitch chains (pitch in fractions of an inch, e.g., 1 inch = #80) and ISO/metric pitch chains (pitch in millimetres). If your existing sprockets are marked with a chain number (e.g., 08B, 10B — ISO B-series), confirm the pitch in millimetres from your sprocket catalogue. If marked with ANSI numbers (40, 50, 60, 80), confirm the inch pitch. We can manufacture chains to run on both sprocket systems if needed. For mixed-fleet operations with both ANSI and ISO equipment, we maintain stock of the most common sizes in both standards and can supply a compatibility cross-reference table on request.

What technical support is available after purchase, particularly if I need assistance with chain selection for a new machine?

Post-purchase technical support includes chain selection assistance, dimensional queries, and troubleshooting for premature wear or fatigue failures. Our engineering team is available Monday to Friday, AEST 9:00–17:00, via email and WhatsApp. For complex selection problems — such as matching a chain to a non-standard agricultural implement or adapting a discontinued OEM specification — we ask customers to submit a technical query form with machine data (operating speed, load estimate, operating environment). Responses are typically provided within 1 business day. For Australian-based OEM machine builders, we can arrange a technical consultation call to assist with chain drive system specification as part of our OEM support programme.

Get in Touch — Source Your C55-Series Rooftop Chain Today

Ready to Source C55-Series Rooftop Chain for Your Australian Operation?

Dapatkan harga yang kompetitif, keserasian yang disahkan dan dokumentasi teknikal terperinci — dihantar dalam masa 24 jam perniagaan dari pertanyaan anda.

✉️ [[email protected]] | 

⏱️

Trusted by OEM buyers across Australia, North America, and Europe for consistent quality and on-time delivery.

Maklumat tambahan

Disunting

Zqq

Produk berkaitan