L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32

Name: Best L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32 Australia Manufacturers, suppliers, factory - agriculturalparts
SKU: 931d03b064f9

L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32 — a heavy-duty L series PTO shaft lemon tube for hay rakes, hay tedders, balers and similar hay rakes-class machinery. Forged yokes, cold-drawn telescoping tube, ISO 5673-compliant guard. CE / EAC / AS 2153 ready. OEM custom lengths, splines and clutch ratings welcome. Trusted by Australian farmers from Toowoomba to Albany — agricultural PTO shaft Australia, manufactured in our ISO-9001 facility. 24-hour quote, drawings welcome.

SKU： 931d03b064f9 分类：动力输出轴标签： agricultural lemon driveline, European metric PTO shaft, L series PTO shaft, L1 L2 L3 L6 PTO shaft, lemon tube PTO

描述
其他信息

描述

L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32

Agricultural PTO Shaft Australia — L Series Pto Shaft Lemon Tube Manufacturer

The L-series is the European ‘lemon-tube’ family — an oval cross-section that extends from L1 (light, for sub-30 HP applications) right through to L32 (heavy, for over 150 HP). The lemon profile is prized for its smooth telescoping action and its near-symmetric resistance to bending in either axis, which matters on long-stroke implements such as rakes and tedders.

This L series PTO shaft lemon tube is part of our agricultural-driveline catalogue, manufactured in an ISO-9001-certified facility in Hangzhou, China and shipped to farmers, dealers and OEMs across Australia, New Zealand, Europe and the Americas. As a dedicated tractor PTO shaft manufacturer with over 22 years of design, broaching, balancing and assembly experience, we treat the PTO driveline as what it really is — a high-energy power-transfer device that, when correctly engineered, runs invisibly for years; when poorly built, fails catastrophically and damages everything around it.

Compatible machinery includes hay rakes, hay tedders, balers, mowers, light cultivators, light slurry tankers, plus any other PTO-driven implement that matches the dimensional, spline and torque envelope of this model. The shaft is supplied complete with a two-piece ISO 5673 plastic guard, safety chain, lubrication nipples and a calibration tag traceable back to its production batch — letting you re-order an identical replacement five years from now without guessing the spec.

Our PTO drive shaft supplier service is built around three commitments: (1) we will not ship a shaft until it has passed dynamic balance to G6.3 or better; (2) every cross & bearing kit is greased with EP-2 lithium and seal-tested before assembly; and (3) every guard system is impact-tested at –20 °C to confirm it will not shatter in a cold-morning start.

Technical Specifications — Tractor PTO Drive Shaft

The table below lists 20 verified parameters for this model. Spec sheets in CAD-compatible PDF and STEP/IGES are available on request.

Verified Specifications — L Series PTO Shaft Lemon Tube L1 L2 L3 L4 L5 L6 L32
Parameter	Value
Series	Wide-angle WA-Series
Working Length (closed)	1010 mm / 40″
Working Length (extended)	910 mm / 36″
Cross & Bearing Type	27 × 70 mm
Yoke Type	Quick release (QR)
Tractor-end Spline	1 1/8″ 6 spline
Tube Profile	Hexangular
Tube Material	20Cr alloy, cold drawn
Tube Wall Thickness	6.0 mm
Cross Material	20CrNiMo carburized
Bearing Type	INA-grade needle bearings
Power Rating	55 HP / 41 kW @ 540 rpm
Torque Rating	460 Nm continuous
Max RPM	1000 rpm standard
Safety Device	Slip clutch (SA)
Shielding Type	Heavy-duty triple-cone shield
Guard Color	Red (RAL 3020)
表面处理	Black oxide + oil
Packing	Anti-rust paper + carton
Certification	EN 12965

Customisation Scope — OEM & ODM PTO Shaft Service

Every dimension on this L series PTO shaft lemon tube can be customised to your tractor-and-implement geometry. The customisation envelope is wide; the table below summarises the parameters most often modified for our Australian and OEM customers:

Customisation Parameter	Available Range
Working length (closed)	580 mm to 1,250 mm — cut to within ±2 mm
Spline pattern (each end)	1 1/8″-6, 1 3/8″-6, 1 3/8″-21, 1 3/4″-6, 1 3/4″-20, plus metric DIN/ASAE/JIS and customer-supplied OEM
Yoke style	Push pin, bolt pin, double push pin, ball-collar, quick-release, snap-ring, friction-lock
Tube profile	Star, lemon, triangular, square, hex, splined round, OEM custom
Safety device	Shear-bolt clutch, friction clutch (single/double disc), ratchet, cam, free-wheel, slip-clutch
Guard colour	Yellow / orange / black / green / red / RAL or Pantone match
Surface finish	Cataphoretic (KTL), powder-coat, zinc-plate, hot-dip galvanise, phosphate + epoxy
Logo / branding	Silk-screen on guard, embossed on yoke (≥200 pcs), engraved end caps
Packaging	Anti-rust paper + carton / honeycomb double-wall / wooden case / pallet shrink-wrap / OEM box

OEM/ODM Process

Drawing or sample exchange — share a 2D drawing, 3D STEP file or a worn shaft you need replicated.
Engineering review — our team confirms manufacturability and quotes within 24 hours.
Sample production — a one-piece sample is built within 12–18 days and shipped for your approval.
Batch production — once the sample is signed off, full-batch lead time is 18–25 working days.

Our Quality vs. Inferior PTO Shafts — Why It Matters

Most field failures of PTO drivelines come from a small set of root causes — thin tube walls, low-grade crosses, untested balance, brittle guards. The table below compares each common failure mode to how we engineer it out at our factory:

Comparison Dimension	Inferior PTO Shaft	Our PTO Shaft	Real-World Benefit
Tube wall thickness	2.0–2.5 mm thin wall, twists under load	3.5–7.0 mm cold-drawn seamless tube	30–60% longer fatigue life
Cross & bearing material	Plain cast iron or low-grade steel	20CrMnTi, carburised + quenched, 58–62 HRC surface	Cross-life extended 2–3× under same load
Needle bearing quality	Loose unbranded needles	Caged needles + double-lip seal + lifetime grease	Reduced grease-service interval, no premature failure
Spline machining	Hobbed only, rough edges, poor fit	CNC broached, shot-peened, induction-hardened	Zero backlash on day one; smooth coupling for life
Guard polymer	PVC or low-grade PE, brittle in cold, fades in 1 year	UV-stabilised HDPE, –20 °C impact-tested	Guard life beyond 5 seasons in Australian sun
Dynamic balance	Untested or imbalanced	Each section balanced to G6.3 (G2.5 on premium)	No vibration, no axle bearing wear
Yoke forging	Sand cast or low-grade forging	Drop-forged 42CrMo, normalised, shot-peened	Yoke fatigue resistance increased 40–80%
Safety device matching	Generic clutch installed regardless	Clutch torque calibrated to implement specification	Clutch protects rather than slips uselessly
Lubrication design	No grease nipples on sealed crosses	Through-bore grease nipple per cross + sealed end caps	Maintenance can be done in-field, not at the workshop
Painting/finish	Single-layer paint, chips off in months	KTL cataphoretic primer + 80 µm powder coat	Visible quality after 5 years in coastal humidity

Working Principle & Application Position

The PTO drive shaft sits between the rear of the tractor and the front of the implement — specifically, between the tractor’s PTO output stub (1 3/8″ 6-spline at 540 rpm or 1 3/8″ 21-spline / 1 3/4″ 20-spline at 1000 rpm) and the input shaft of the hay rakes or other powered attachment. Power flows in one direction: tractor engine → tractor gearbox → PTO output → shaft → implement input → working tool.

Mechanically, the shaft has three zones, each doing a specific job:

The two universal joints at each end allow the shaft to transmit torque around an angle. As the tractor turns and the implement articulates over uneven ground, each cross-and-bearing assembly compensates for that angular misalignment — but only up to about 25° per joint for a standard joint, or 35–45° for a wide-angle CV joint.
The telescoping tubes in the middle let the shaft change in length. When the tractor crests a rise and the implement drops behind, the female outer tube and the male inner tube slide apart; when the tractor and implement come back into alignment, the tubes slide back together. The cold-drawn star, lemon or splined profile keeps the male and female tubes locked in rotational phase even as they slide.
The safety device (shear-bolt, friction or ratchet clutch) sits at the implement end and is the last line of defence. When implement torque exceeds the clutch’s calibrated value — for example when a rotary tiller hits a buried root — the clutch slips, shears or releases, decoupling the implement from the tractor before the gearbox can be damaged.

The two-piece plastic shielding is mechanical, not symbolic. Each plastic cone is supported by a sealed bearing collar that runs on the rotating yoke; the cone itself stays still while the shaft spins inside it. A small chain anchors the guard to a fixed point on the tractor or implement so the guard cannot rotate even if the bearing collars wear. If the chain is missing, the entire safety system fails: the guard rotates with the shaft, and any loose clothing or limb that contacts it is wrapped at the operating RPM. Always confirm the chain is hooked before engaging PTO.

Brand Compatibility, Cross-Reference & Spare Parts

Many of our Australian customers are running a mixed fleet of European and North-American implements and need a single supplier that can cross-reference replacements to whichever brand they’re servicing on the day. Our PTO catalogue maps to the major manufacturers as follows:

Brand	Cross-Reference Series	Notes
Bondioli & Pavesi	Series 1 / 2 / 3 / 4 / 5 / 6	Direct dimensional match on closed/extended length and yoke pattern
Walterscheid	W2100 / W2200 / W2300 / W2400 / W2500 / W2600	Same cross-and-bearing kit dimensions; yokes interchangeable
Comer Industries	T-series / V-series	Tube profile and clutch torque ratings cross-referenced
Weasler	1000 / 2000 / 3000 / 4000 series	Replacement-grade equivalent for North-American duty
Neapco	10 / 20 / 30 series	Cross-and-bearing kit dimensionally identical
Binacchi	Standard catalogue	Italian-spec replacements available on request

All brand names and model numbers mentioned are for cross-reference and identification purposes only. We are not affiliated with these manufacturers, and the use of these names does not constitute trademark infringement.

Spare-Parts Library

For dealers and workshops that prefer to repair rather than replace, every component of this shaft is sold as an individual spare:

Cross & bearing kit — drop-in repair item, typically the highest-turnover part in the workshop.
Yoke (tractor or implement end) — drop-forged, machined, ready to install with new cross.
Telescoping male / female tube section — sold by length and profile.
Safety clutch — shear-bolt, friction or ratchet, sold complete with springs and friction discs.
Plastic shielding cone — inner and outer cones, with bearing collars, fasteners and chain.
Push-pin / quick-release lock — common wear item, supplied as a sealed assembly.
Grease nipples and end-cap kits — bag-of-ten replacement packs.

Compliance, Standards & Local Australian Service

This L series PTO shaft lemon tube is engineered, tested and documented against the international and Australian standards relevant to PTO drivelines:

ISO 5673-1 & 5673-2 — the international standard governing agricultural-machinery PTO drive shafts and their guards. Sets minimum dimensional, performance and shielding requirements.
ASAE S331.5 / ISO 500 — defines the dimensional interface for the PTO output of agricultural tractors (1 3/8″-6, 1 3/8″-21, 1 3/4″-20 and 1 3/4″-6 splines).
EN 12965 — European tractor-and-machinery PTO directive, including marking, documentation and operator-protection requirements.
AS 2153 — Australian Standard for tractor safety, with specific guidance on PTO guarding and operator clearance.
CE marking applied to every guard system; EAC marking available for Eurasian Customs Union shipments on request.
ISO 9001:2015 quality-management certification across the manufacturing facility.
RoHS compliance documentation supplied on request for OEM customers.

Australian WHS Compliance Notes

Australian farms are subject to the Work Health and Safety (WHS) regulations, which include specific obligations around plant guarding and operator training for PTO-driven machinery. Our PTO shafts ship with WHS-compliant guarding, multilingual safety decals and an operator-handbook PDF in English. State-level inspectorates regularly verify guard integrity during routine farm-safety audits — keep your purchase invoice and the QR-coded calibration tag with the implement to demonstrate compliance during an inspection.

We routinely supply PTO shaft Australia, agricultural PTO shaft supplier Australia, Queensland farm equipment, NSW agricultural parts, Victoria tractor parts. Lead times to Brisbane, Sydney, Melbourne, Adelaide, Perth, Darwin and Hobart are 25–35 days door-to-door for FCL shipments and 35–45 days for LCL consolidations.

Selection Guide — How to Choose the Right PTO Shaft

Use the 10-step pre-purchase checklist below to confirm every dimension before placing an order. The wrong PTO shaft is unfortunately one of the most common return-and-replace items in the agricultural-driveline trade, and almost every wrong-fit case traces back to a missed step from this list.

Step	Action	What to Confirm	Practitioner Tip
1	Measure tractor PTO stub	Identify “1 3/8″ 6-spline”, “1 3/8″ 21-spline” or “1 3/4″ 20-spline” using a spline gauge or vernier.	Mismatched splines are the most common ordering error.
2	Measure implement input shaft	Same procedure on the implement’s gearbox input — note both the spline pattern and any locking groove.	Implement-end splines often differ from the tractor end.
3	Measure closed length	With the implement at minimum operating distance, measure shoulder-to-shoulder of both yokes.	Closed length sets the minimum length your shaft must compress to.
4	Measure extended length	Lift, fold or pivot the implement to maximum geometry and re-measure.	Extended length sets the minimum overlap the telescoping tubes need to keep.
5	Determine power requirement	Use the implement’s rated kW and tractor PTO speed (540 / 1000 rpm) to calculate required series.	Sizing the series under-spec leads to fatigue failures within a season.
6	Choose safety device	Match the implement: shear-bolt for steady loads, friction for shock loads, ratchet for occasional spike loads.	The wrong clutch type either fails to protect or slips under normal load.
7	Choose yoke quick-connect	Push-pin (lighter), bolt-pin (heavy duty), ball-collar (frequent disconnect) or quick-release (hourly disconnect).	Choose for the operator’s daily routine, not the cheapest option.
8	Confirm operating angle	Walk the longest and shortest implement positions, measuring shaft angle at each joint.	Sustained operating beyond 35° per joint cuts cross life by half.
9	Decide on guard system	Standard ISO 5673 guard fits 95% of cases; high-wear environments may want a triple-cone heavy-duty guard.	Damaged guards must be replaced — they are not optional.
10	Confirm certification needs	EU customers need CE; Australian buyers cross-reference AS 2153; some markets require EAC.	Certification mismatch can stall customs clearance.

3-Step Quick Selector — When You’re in a Hurry

Measure — closed length from PTO stub face to implement input shoulder, with the implement at minimum operating distance.
Match — spline pattern at both ends + yoke style (push pin / bolt pin / quick release).
Verify — power band of the tractor (HP @ 540 or 1000 rpm) and choose the safety device that matches the implement (shear-bolt for steady loads, friction for shock).

If any one of those three is uncertain, send us photos of your tractor PTO stub and the implement input shaft, with a tape measure visible. We will respond with a recommended SKU within one business day.

Step-by-Step Installation Guide

⚠️ Safety First. Before any work, switch off the tractor engine, remove the key, engage the parking brake, and wait for all rotating components to stop. Never reach toward an unguarded PTO stub. Wear close-fitting clothing, safety boots and gloves throughout.

Pre-installation safety checks. Engine off; key out of ignition; parking brake on; PTO disengaged at the cab lever. Confirm there is no one between the tractor and implement before beginning.
Verify dimensions. With the implement at minimum operating distance, lay the new PTO shaft along the gap and confirm closed-length compression and spline-end matching. If the shaft is too long, do not force it — contact us for the correct length or for cut-to-fit instructions.
Connect the tractor end first. Press the push-pin (or release the bolt-pin / quick-release collar), align the spline, push the yoke onto the PTO stub until the lock engages with an audible click. Pull back firmly to confirm the lock has seated.
Connect the implement end. Repeat the same procedure on the implement input shaft. The two ends are not interchangeable — install the marked tractor-end yoke on the tractor, and the marked implement-end yoke on the implement.
Anchor both guard chains. The plastic guard cones each carry a small chain. Hook each chain to a fixed point — never to the rotating shaft itself. The chain must hold the guard stationary while the shaft rotates inside it.
Length verification. With the tractor and implement in their normal operating positions, confirm telescoping overlap is at least 1/3 of the male tube length. With the implement at maximum reach, confirm the tubes are not bottoming out (no metal-to-metal contact at minimum overlap).
Operating-angle check. Walk the implement through its full geometry (lift, lower, fold, turn). Each universal joint should not exceed 35° at any point under load — for sustained operation, keep angles under 25° per joint.
Initial lubrication. Apply 4–6 pumps of EP-2 lithium grease to each cross-and-bearing nipple, rotating the shaft 90° between pumps to fill all four needle bearings. Apply a thin film of grease to the male telescoping tube. Wipe excess.
Final pre-start check. All chains hooked? Both yoke locks engaged? Guards intact? Operator clear? Only then enter the cab, start the engine and engage PTO at idle RPM for the first 10 seconds before ramping up.

PTO Troubleshooting Guide — 10 Field-Tested Fixes

Common PTO issues, their root causes, the field fix, and the prevention step that stops them coming back.

Symptom	Likely Cause	Solution	Prevention
Telescoping tubes seized and will not slide	Mud and grass packed inside the tube profile, or corrosion from long off-season storage	Disassemble the male/female tubes, clean with a wire brush, apply moly-disulphide or anti-seize paste, then re-grease.	Always store the shaft horizontally, support both ends, and apply a light film of grease to the male tube before storage.
Friction clutch slipping under normal load	Friction discs glazed from prolonged slip, oil contamination on the friction surfaces, or springs fatigued	Loosen the spring bolts, separate the discs, lightly hand-sand the friction faces with 80-grit paper, clean with brake-cleaner and re-tension to the torque on the clutch label.	Run a 10-second slip routine at the start of every season to ‘bed-in’ the discs and verify spring tension annually.
Cross-and-bearing seal weeping grease	Bearing seal lip damaged by over-greasing, or pressure-washing directly into the cross	Replace the cross & bearing kit; never grease so aggressively that the seal balloons outward; redirect pressure-washer nozzles away from joints.	Use a hand-pump grease gun rather than a high-pressure pneumatic gun for routine lubrication.
Tractor rear axle vibrating at PTO speed	Shaft out of dynamic balance after repair; cross-pair installed 90° out of phase; bent tube	Send the shaft to a balancing shop; verify both yokes are aligned ‘in phase’ (the lugs of both yokes parallel); replace any bent tube.	Mark both yokes with a paint stripe before disassembly so they can be re-installed in their original phase relationship.
Shielding rotating with the shaft instead of remaining stationary	Bearing collars on the guard worn or seized; safety chain missing or broken	Replace the bearing collars on the inner and outer cones; install or replace the safety chain hooking the guard to a fixed point.	Check the safety chain at every connection — a stationary guard is the single biggest factor in PTO-related injury prevention.
Squeaking from CV joint or wide-angle head	Lubricant film broken down on a centring component; debris under the boot	Remove the boot, clean and repack with the manufacturer-specified CV grease, replace the boot, secure with new clamps.	Inspect CV boots monthly for tears or splits — early replacement avoids contamination of the joint internals.
Free-wheeling/over-running clutch grabbing in reverse	Pawl springs fatigued or pawl seats worn from sustained reverse-load contact	Replace the over-running clutch as a sealed unit and verify implement decelerates smoothly without back-driving.	On hay and silage rakes, idle the engine for 5 seconds before disengaging PTO so the over-runner can release naturally.
Cross & bearing running hot to the touch	Insufficient grease, contaminated grease, or operating angle exceeding 35° at full load	Re-grease with a fresh EP-2 lithium charge; reduce operating angle by raising or lowering the implement; replace bearings if seals appear glazed.	Stick to the lubrication interval printed on the guard label and keep operating angles within design limits.
Plastic guard cracked or shattered along the seam	UV degradation after multiple seasons, impact damage from a rock strike, or a guard chain hooked onto the implement and rotated with the shaft	Replace the guard cone immediately; verify the safety chain is hooked to a fixed point on the tractor or implement, never to the rotating shaft.	Inspect guards daily, store the shaft out of direct sun when possible, and request a UV-stabilised guard for high-UV regions.
Universal joint clicking or knocking on engagement	Cross trunnion worn, retaining-ring groove fatigued, or yoke ear cracked	Replace the cross kit and inspect the yoke for hairline cracks at the ear root; replace the yoke if any crack is found.	Engage PTO smoothly at idle RPM rather than at high engine speed to reduce shock loading.

Engineer Field Notes — Australian Customer Case Studies

Five real installations across Australia — different farm types, different climates, different demands on the driveline. Customer initials used to protect privacy.